|
WANALYZER_GENERAL_SETTINGS structure |
  
|
|
WANALYZER_GENERAL_SETTINGS structure |
|
The WANALYZER_GENERAL_SETTINGS structure describes the general settings applied to the Waveform Analyzer. The current settings can be retrieved through the SettingsGeneralGet method and modified through the SettingsGeneralSet method.
Visual C++ definition
typedef struct
{
short bAppearance3d;
long nResolution;
float fHorizontalZoomFactor;
float fVerticalZoomFactor;
short nPositionLineWidth;
long nPositionLineDashStyle;
OLE_COLOR colorPositionLine;
short bPlaybackLineVisible;
short nPlaybackLineWidth;
long nPlaybackLineDashStyle;
OLE_COLOR colorPlaybackLine;
long nPositionLineHighCap;
long nPositionLineLowCap;
long nPositionLineDashCap;
short nPositionLineTranspFactor;
long nPlaybackLineHighCap;
long nPlaybackLineLowCap;
long nPlaybackLineDashCap;
short nPlaybackLineTranspFactor;
short bVerticalLinesOnTimeRuler;
short bAutoRefresh;
} WANALYZER_GENERAL_SETTINGS;
This data structure is defined inside the WavMmsEngDef.h header file which can be found inside the product's Include directory (default \Program Files\MultiMedia Soft\Active Waveform Analyzer\include).
Visual Basic definition
Public Type WANALYZER_GENERAL_SETTINGS
bAppearance3d as Boolean
nResolution as enumAnalyzerResolutions
fHorizontalZoomFactor as Single
fVerticalZoomFactor as Single
nPositionLineWidth as Integer
nPositionLineDashStyle as enumWaveformLineDashStyles
colorPositionLine as OLE_COLOR
bPlaybackLineVisible as Boolean
nPlaybackLineWidth as Integer
nPlaybackLineDashStyle as enumWaveformLineDashStyles
colorPlaybackLine as OLE_COLOR
nPositionLineHighCap as enumLineCaps
nPositionLineLowCap as enumLineCaps
nPositionLineDashCap as enumLineDashCaps
nPositionLineTranspFactor as Integer
nPlaybackLineHighCap as enumLineCaps
nPlaybackLineLowCap as enumLineCaps
nPlaybackLineDashCap as enumLineDashCaps
nPlaybackLineTranspFactor as Integer
bVerticalLinesOnTimeRuler as Boolean
bAutoRefresh as Boolean
End Type
This data structure is defined inside the AsoedDef.bas module file which can be found inside the product's Include directory (default \Program Files\MultiMedia Soft\Active Waveform Analyzer\include).
Member |
Description |
||||||||||||||||||||||||
|
|
||||||||||||||||||||||||
Boolean value that specifies if the Waveform Analyzer is displayed with 3D borders.
Supported values are the following:
|
|||||||||||||||||||||||||
Resolution used for waveform's analysis. Supported values are the following:
|
|||||||||||||||||||||||||
Floating point value indicating the factor applied to zooming operations: by default the zoom factor is 2.0. The value of this field cannot be lower than 1.01. Smaller values will be automatically capped to 1.01. |
|||||||||||||||||||||||||
Factor applied to vertical zooming operations. can assume values ranging from 0.5 to 5. Values outside of this range will be automatically capped to the nearest valid value. - Values smaller than 1 will vertically zoom-out the waveform, reducing its vertical size - Value 1 will display the waveform without zooming (default) - Values higher than 1 will vertically zoom-in the waveform, increasing its vertical size |
|||||||||||||||||||||||||
Width in pixels of the line that indicates a selected position on the waveform |
|||||||||||||||||||||||||
Dash style of the line that indicates a selected position on the waveform. Supported values are the following:
On the screenshot below you can see the different dash styles with the corresponding value displayed:
|
|||||||||||||||||||||||||
Color used for rendering the line that indicates a selected position on the waveform. |
|||||||||||||||||||||||||
Boolean value that specifies if the line that indicates the playback position is visible during a playback session. Supported values are the following:
|
|||||||||||||||||||||||||
Width in pixels of the playback line |
|||||||||||||||||||||||||
Dash style of the line that indicates the playback position on the waveform during a playback session. Supported values are the same as seen for the nPositionLineDashStyle field above. |
|||||||||||||||||||||||||
Color used for rendering the line that indicates the playback position on the waveform during a playback session. |
|||||||||||||||||||||||||
Type of cap for the high end of the position line. Supported values are the following:
On the screenshot below you can see the different types of line caps with the corresponding value displayed:
|
|||||||||||||||||||||||||
Type of cap for the low end of the position line. Supported values are the same as seen for the nPositionLineHighCap field above. |
|||||||||||||||||||||||||
Type of dash/dot cap for the position line. Supported values are the following:
On the screenshot below you can see the different types of line dash caps with the corresponding value displayed:
|
|||||||||||||||||||||||||
Transparent factor applied to the position line. This value can range from 0 (total opacity) to 255 (total transparency). Values outside of this range will be automatically capped to the nearest valid value. |
|||||||||||||||||||||||||
Type of cap for the high end of the playback line. Supported values are the same as seen for the nPositionLineHighCap field above. |
|||||||||||||||||||||||||
Type of cap for the low end of the playback line. Supported values are the same as seen for the nPositionLineHighCap field above. |
|||||||||||||||||||||||||
Type of dash/dot cap for the playback line. Supported values are the same as seen for the nPositionLineDashCap field above. |
|||||||||||||||||||||||||
Transparent factor applied to the playback line. This value can range from 0 (total opacity) to 255 (total transparency). Values outside of this range will be automatically capped to the nearest valid value. |
|||||||||||||||||||||||||
Boolean value that specifies if caps of vertical lines must be rendered over time rulers. Supported values are the following:
|
|||||||||||||||||||||||||
Boolean value that specifies if the waveform is refreshed automatically during the analysis phase. Supported values are the following:
|
