[Visual Basic]

control.SoundComposer.ItemSlidingWaveToneAdd (

strFriendlyName as String,

nChannel as Integer,

nWaveType as enumSoundGenSlidingWaveTypes,

fFrequencyStart as Single,

fFrequencyEnd as Single,

fAmplitudeStart as Single,

fAmplitudeEnd as Single,

bLogInterpolation as enumBoolean,

nDurationMs as Long,

nFadeInMs as Long,

nFadeOutMs as Long,

nOffsetMs as Long,

ByRef nUniqueId as Long

) as enumErrorCodes

[C++]

short control.SoundComposer.ItemSlidingWaveToneAdd (

LPCTSTR strFriendlyName,

short nChannel,

short nWaveType,

float fFrequencyStart,

float fFrequencyEnd,

float fAmplitudeStart,

float fAmplitudeEnd,

short bLogInterpolation,

long nDurationMs,

long nFadeInMs,

long nFadeOutMs,

long nOffsetMs,

long *nUniqueId

);

Parameter

Description

strFriendlyName

Friendly name of the item

nChannel

Channel of the audio stream that will reproduce the item: can be a value between 0 and the number of channels of the audio stream created through the SoundComposer.SessionInit method.

nWaveType

Type of wave tone.

Supported values are the following:

fFrequencyStart

Initial wave tone frequency expressed in Hertz, e.g. 700

fFrequencyEnd

Final wave tone frequency expressed in Hertz, e.g. 1000

fAmplitudeStart

Initial wave tone amplitude.

- value 0.0 means that sound volume is muted

- values higher than 0.0 and lower than 1.0 attenuates the sound volume

- value 1.0 sets the sound at full volume

- values higher than 1.0 amplifies the sound volume

fAmplitudeEnd

Final wave tone amplitude.

- value 0.0 means that sound volume is muted

- values higher than 0.0 and lower than 1.0 attenuate the sound volume

- value 1.0 sets the sound at full volume

- values higher than 1.0 amplify the sound volume

bLogInterpolation

Boolean value indicating if the sliding should use linear or logarithmic interpolation.

Supported values are the following:

nDurationMs

Duration of the wave tone expressed in milliseconds

nFadeInMs

Duration of the fade-in at the beginning of the tone expressed in milliseconds. Set this value to 0 if you don't need to apply a fade-in at the beginning of the audio stream.

nFadeOutMs

Duration of the fade-out at the end of the tone expressed in milliseconds. Set this value to 0 if you don't need to apply a fade-out at the end of the audio stream.

nOffsetMs

Offset of the sliding wave tone, expressed in milliseconds, respect to the beginning of the audio stream.

nUniqueId

Reference to a value that, on return from the method call, will contain the unique identifier of the newly added element: this unique identifier will be used in order to invoke further methods related to the use of this specific element:

- SoundComposer.ItemSlidingWaveToneLimitsGet to obtain the initial and final frequency/amplitude of the sliding wave tone

- SoundComposer.ItemSlidingWaveToneLimitsSet to modify the initial and final frequency/amplitude of the sliding wave tone

- SoundComposer.ItemSlidingWaveToneTypeGet to obtain the current type of sliding wave tone

- SoundComposer.ItemSlidingWaveToneTypeSet to modify the current type of sliding wave tone

- SoundComposer.ItemChannelGet to obtain the channel of of the audio stream that will reproduce the item

- SoundComposer.ItemChannelSet to modify the channel of of the audio stream that will reproduce the item

- SoundComposer.ItemRemove to remove the item from the sound composition

- SoundComposer.ItemDurationGet to obtain the duration, expressed in milliseconds, of the item

- SoundComposer.ItemDurationSet to modify the duration, expressed in milliseconds, of the item

- SoundComposer.ItemOffsetGet to obtain the offset, expressed in milliseconds, of the item respect to the beginning of the audio stream

- SoundComposer.ItemOffsetSet to modify the offset, expressed in milliseconds, of the item respect to the beginning of the audio stream

- SoundComposer.ItemTypeGet to obtain the item's type

- SoundComposer.ItemFriendlyNameGet to obtain the friendly name of the item

- SoundComposer.ItemFriendlyNameSet to modify the friendly name of the item

The usage of the SoundComposer.ItemAmplitudeGet and SoundComposer.ItemAmplitudeSet methods is not supported on sliding wave tones; use the SoundComposer.ItemSlidingWaveToneLimitsGet and SoundComposer.ItemSlidingWaveToneLimitsSet methods to obtain and modify the initial and final frequency/amplitude of the sliding wave tone.

Value

Meaning

Negative value

An error occurred, check the LastError property value in order to get the error code

enumErrorCodes.ERR_NOERROR (0)

The method call was successful